Air Conditioner and Heater Units for 2006 Dodge Charger
Includes: Evaporator to Dash, Air Inlet, Defrost and Unit Mounting Washers.
Includes: Heater Tube Clamp, and Studs. Includes: Upper and Lower Evaporator Housings, Air Inlet Housing, Recirc. Door, Clamp.
Includes: Upper and Lower Evaporator Housings, Air Inlet Housing, Recirc. Door, Clamp.
Blower Motor Housing
Includes Air Inlet Housing only
M4.8-1.59x19. Used To Hold Housing Components Together And Attach Blower Motor. Limit One Per Component.
[15.5mm]. [15mm]. 15.51mm ID 2.63mm Thick. 15.51mm ID 2.63 thick. 3/4 Evaporator to H-Valve. 3/4 Expansion Valve to Evaporator. Suction. Valve to Evaperator. 15.54MM ID.
3/8. 3/4 inch, Red. Evaporator Side 10mm. 1/2 Evaporator to H-Valve. Up to 02/29/12. 1/2 Expansion Valve to Evaporator. Liquid. Valve to Evaperator. 10.25MM ID.
Includes: Evaporator to Dash, Air Inlet, Defrost and Unit Mounting Washers.
Blower Motor Housing
Includes Air Inlet Housing only
Includes: Heater Tube Clamp, and Studs. Includes: Upper and Lower Evaporator Housings, Air Inlet Housing, Recirc. Door, Clamp.
Includes: Upper and Lower Evaporator Housings, Air Inlet Housing, Recirc. Door, Clamp.
M4.8-1.59x19. Used To Hold Housing Components Together And Attach Blower Motor. Limit One Per Component.
Includes: Distribution Housings Right and Left, Doors, Links, Levers.
[15.5mm]. [15mm]. 15.51mm ID 2.63mm Thick. 15.51mm ID 2.63 thick. 3/4 Evaporator to H-Valve. 3/4 Expansion Valve to Evaporator. Suction. Valve to Evaperator. 15.54MM ID.
3/8. 3/4 inch, Red. Evaporator Side 10mm. 1/2 Evaporator to H-Valve. Up to 02/29/12. 1/2 Expansion Valve to Evaporator. Liquid. Valve to Evaperator. 10.25MM ID.
Topwell Trim Attaching. M6.3X23.4. Inner Silencer. Hood insulator attaching. M6.3X23.4. Air Dam Attaching. Radiator Side Seal to Support. M6.3X23.4. panel to cowl Plenum. M6.3X23.4. Dash Silencer Attaching. M6.3x23.4. liner to frt wheelhouse. M6.3X23.4. Rear Wheelhouse Silencer. M6.3X23.4. Liner To Front Wheelhouse. M6.3X23.4. Dash And Cowl Plenum Usages. M6.3X23.4. Front Wheel Liner to Fascia. M6.3X23.4. Front Liner To Support Bracket.
***SOLD INDIVIDUALLY***