Crankshaft, Pistons and Torque Converter for 2006 Dodge Charger
See Note. Cylinders 1-2-3-4-5. Undersize .008. 1,2,3,5. One [1] Package Contains One [1] Upper And One [1] Lower Main Bearing. Mega Cab. A Grade. [# 1,2,3,4,5]. .008mm U/S. .008mm O/S.
Sleeve
Automatic Transmissions. Installation. Also Serviced in Crankshaft Assembly. Crankshaft Pilot.
B Grade. See Note. One [1] Package Contains One [1] Upper And One [1] Lower Main Bearing. Cylinders 1-2-3-4-5. Mega Cab. Standard.
Washer Washer Package
Std. Front Thurst. See Note. Mega Cab. Damper To Crankshaft. Contains Front And Rear Thrust Washers. Crankshaft Thurst Washer. Includes Front And Rear Washers.
One [1] Package Services The Complete Engine. One [1] Package Is For The Complete Engine. Standard Size.
Std. Cylinders 2,4,6,8 Includes Rings And Bearings. Cylinders 2,4,6,8 For Vehicles Built Up To 6/18/07.
Std. Cylinders 1,3,5,7 Includes Rings And Bearings. Cylinders 1,3,5,7 For Vehicles Built Up To 6/18/07.
Hex Flange Head Screw
[m10x1.00x45.75]. Connecting Rod Cap To Connecting Rod Cylinders 1,3,5,7. Cylinders 2,4,6,8.
With M14 Threads. Crankshaft Dampner. Damper and Pulley Assy. to Crankshaft. See Notes. [M14x1.5x1.2.0]. [M14x1.5x102.0].
Oversize .008. #1,2,3,5. C Grade. See Note. Cylinders 1,2,3,4,5. Mega Cab. One [1] Package Contains One [1] Upper And One [1] Lower Main Bearing. .008mm O/S. .008mm U/S.
Dowel Pin, Oil Seal Retainer
Block to Crankshaft Seal. Rear Crankshaft Seal Retainer. Rear Oil Sear Retainer. Rear Oil Seal Retainer. Front Cover To Cylinder Block. Carrier balance shaft. Also Serviced In Item 4 Retainer Package. Rear Retainer To Engine Block. [m8x10.0].
Hex Flange Head Screw
M6x1.00x28.00. M6x1.00x24.00. M6x1.0x24.0. Rear Mail Oil Seal Retainer To Crankshaft. Rear Cranshaft Oil Seal Retainer To Cylinder Block.
Drive Plate And Flywheel Bolt
Torque Converter Drive Plate To Cylinder Block. [m6x1.00x90.00]. Mega Cab. M10x1.00x18.00. Quad Cab. Regular Cab. Plate To Crankshaft.
Screw
Tourque Converter To Drive Plate AWD. All Wheel Drive. Torque Converter To Flexplate. Drive Plate To Torque Conveter. [M8x1.25x18.0]. Tourque Converter To Flexplate. [m8x1.25x18.00 ]. Drive Plate to Torque Converter.
Hex Screw And Washer
M8x1.25x45.00. M8x1.25x45.0. Main Bearing Cap Side Bolt. Bearing Cap To Engine Block. Main Bearing Cross. Main Bearing Side Cap To Cylinder Block. ***SOLD INDIVIDUALLY***
Hex Flange Head Screw
M12x1.75x91.50. M12x1.75x89.10. M12x1.75x91.2. Bearing Cap To Engine Block. For Main Bearing Cap. [M12x1.75x91.5]. Main Bearing Cap To Engine.
Double Ended Stud
M12x1.75x1.25x152.10. M6x1.00x18.00. M12xm8. M12&M8; Oil Pickup Tube To Main Bearing Cap.