Front Suspension, Strut and Cradle for 2016 Dodge Journey

After 10/20/07.

Use With Original Strut. Strut To Knuckle.

M12x1.25. Steering Gear to Tie Rod End. Knuckle to LCA. Strut Mount to Strut Rod. Tie Rod Ends to Tie Rod. Knuckle to Lower Control Arm.

M10x1.50x60.00. Hub and bearing to knuckle. Front Bearing to Knuckle. Starter Motor to Engine Block. Sway Bar Link to Sway Bar. Winch To Bracket. Frt knuckle to bearing.

Lower Control Arm, Left

Front.

Lower Control Arm, Right

Front.

Frt Knuckle B/jnt Snap Ring

Export.

Export.

Screw and washer hex flange head m14x1.50x98.00. Lower Control Arm to Cradle. LCA to Crossmember. M14x1.50x95.00. Crossmember to Body, [M14x1.50x98].

M14x1.50x110.00.

M10x1.25. Wiper Arm Attaching. Wiper Arm Nut. Wiper Arm To Pivot. Shock Mount to Body. Strut Mount to Body. Wiper Arm To Wiper Module. Shock to Shock Mount. Wiper Arm To Linkage. Shock to Shock Mnt.

[sdf=sdd=sde+zua,zfa].

[sdf=sdd=sde+zub,zfb].

[sdf=sdd=sde+zuc,zfc].

[sdf=sdd=sde+zud,zfd].

[sda=sdf=sdd+zaa,zna].

[sda=sdf=sdd+zab,znb].

[sda=sdf=sdd+zac,znc].

[sda=sdf=sdd+zad,znd].

[sda=sdf=sdd+zae,zne].

[sda=sdf=sdd+zaf,znf].

[sda=sdf=sdd+zng,zag].

[sda=sdf=sdd+znh,zah].

[sda=sdf=sdd+zaj,znj].

[sdc=sda+zca,zra].

[sdc=sda+zcb,zrb].

[sdc=sda+zcc,zrc].

[sdc=sda+zcd,zrd].

[sdc=sda+zce,zre].

[sdc=sda+zcf,zrf].

[sdc=sda+zcg,zrg].

[sdc=sda+zch,zrh].

[sdc=sda+zcj,zrj].

[sdc=sda+zck,zrk].

[sdc=sda+zcl,zrl].

[sdc=sda+zcm,zrm].

[sdc=sda+zcn,zrn].

Front Coil Spring, Left

Front Coil Spring, Left

Front Coil Spring, Left

Front Coil Spring, Left

Front Coil Spring, Left

Front Coil Spring, Left

Front Coil Spring, Left

Front Coil Spring, Left

Front Coil Spring, Left

Front Coil Spring, Left

Front Coil Spring, Left

Front Coil Spring, Left

Front Coil Spring, Left

M12x1.50. Knuckle to Lower Control Arm. UCA Ball Joint to Knuckle. Knucle to lower control arm.

2 Per Vehicle. Use With Service Strut. 2 Bolts Included in Each Kit. Only 2 Kits Needed. This Is A Repair Package For One Side, See Quanity.

M14x2.00x77.0. Strut to Knuckle.

Front Suspension Crossmember

Crossmember Bracket, Right

Crossmember Bracket, Left

Exhaust pipe assembly to rear engine mount bracket. Hitch Bracket To Frame. Plastic Corner Bracket To GAWR Bracket. Skid Plate To Frame. Screw hex flange head m10x1.50x30.00.

Crossmember Isolator, Front

Front crossmember.

Crossmember Isolator

Front crossmember. At Rear Of Crossmember.

M14x1.50x145.00.

M14x1.50x110.00.

Front crossmember.

Screw and washer hex flange head m14x1.50x98.00. Lower Control Arm to Cradle. LCA to Crossmember. M14x1.50x95.00. Crossmember to Body, [M14x1.50x98].

Front Frame Crossmember

Crossmember Bushing

Frt Susp C/mem Sleeve

Hex Head Screw And Washer

M12x1.50x140.00. Front Crossmember To Radiator Support.