Air Conditioner and Heater Plumbing for 2019 Dodge Charger
10mm ID. 8.6mm id. Condenser End. Drier End. Drier to Condenser. Expansion Valve End. Liquid line to Drier. After 8/21/08. 3/8". Condensor end.
68308727aa. On Or After 06/28/2010. Includes: O-ring.
Switch to Line. Used at Switch. Suction line. For Transducer Valve.
3/4". Suction Line to Accumulator. Expansion Valve End. Accumulator End After 5/27/08. Drier End. At Expansion Valve. After 6-17-08. Suction line to H-Valve.
Round 1/2in. Condenser End. Discharge line to Compressor. Receiver Drier. 1/2".
With Drier - NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
Screw
Receiver Drier. Drier to Condenser. Drier Attaching.
68308727aa. On Or After 06/28/2010. Includes: O-ring.
Switch to Line. Used at Switch. Suction line. For Transducer Valve.
3/4". Suction Line to Accumulator. Expansion Valve End. Accumulator End After 5/27/08. Drier End. At Expansion Valve. After 6-17-08. Suction line to H-Valve.
Screw
Receiver Drier. Drier to Condenser. Drier Attaching.
Related Parts
Cable Attach to Side Rail. M8x1.25x20.00. Sensor and bracket. P/S Pressure Hose to Engine Mount. M8x1.25x20.00. Battery Harness Clip. M8x1.25x20.00. Rear Trough To Engine. M8x1.25x20.00. Hose Bracket to Strut. M8x1.25x20.00. DCP Bracket to Engine. M8x1.25x ...
27x15. Power Steering Hose To Power Steering Pump and Reservoir. Hose to Cooler and Reservoir. M28.9 x 1.60. Ais hose. Cool Ret Hose/Pres Btle. Convertible.