Front Suspension for 2003 Dodge Durango
Control Arm Shaft Washer, Mounting
UCA Outer. UCA Pivot Bar.
Hex Lock Nut, Mounting
.562 - 18. UCA Pivot Bar Bolt and Retainer-Up To and Including 06-04-03. UCA Pivot Bar to Frame. UCA to Frame Rail. Pivot Bar Mounting.
Upper Control Arm Ball Joint Package, Right Or Left
UPPER CONTROL ARM
Castle Nut, Mounting
M14x1.5. UCA Ball Joint Mounting. Ball Joint Stud. Upper Ball Joint.
LCA Ball Joint Stud. Lower Ball Joint. LCA Ball Joint Mounting.
Hex Head Screw And Washer, Mounting
M8-1.25x32.00. Liftgate Hinge To Body Attaching. Pedal Bracket to Plenum. Shock Lower.
Cotter Pin, Mounting
Track Bar to Frame. LCA Ball Joint Stud. Ball Joint Mounting.
Lower Control Arm Ball Joint Package, Right Or Left
LOWER CONTROL ARM
Bolt And Retainer, Mounting
.562-18x2.07. Pivot Bar Mounting. UCA Pivot Bar.
Bolt And Retainer, Mounting
Lower Shock To Knuckle Rear. Spring Link to Knuckle. UCA Pivot Bar Bolt and Retainer.
Bolt And Retainer, Mounting
.562-18x2.07. Pivot Bar Mounting. UCA Pivot Bar.
Upper Control Arm Ball Joint Package, Right Or Left
UPPER CONTROL ARM
Castle Nut, Mounting
M14x1.5. UCA Ball Joint Mounting. Ball Joint Stud. Upper Ball Joint.
Cotter Pin, Mounting
Track Bar to Frame. LCA Ball Joint Stud. Ball Joint Mounting.
LCA Ball Joint Stud. Lower Ball Joint. LCA Ball Joint Mounting.
Screw And Washer, Mounting
M12x1.75x75.00. Engine Mount To Left Axle Bracket. Engine Mount To Right Axle Bracket. Torque Rod Bracket to Transmission. Shock Mounting. Shock to LCA. Compression link to knuckle. Camber Screw Toe Link to Frame. Shock to Shock Tower. Shock Lower.
M14x2.00x114. M14x2x110. Rear Pivot Mounting. LCA Rear Pivot. LCA to Axle Mounting. Control Arm to Axle.
Nut, Mounting
Strut to Knuckle Mounting. Weld Assembly to Link. Shock To Lower Control Arm. Pivot Bar Mounting Bolt. M16x2.00x122.00. And Washer. Gear to Cradle. Lca. UCA Pivot Bar. UCA to Frame.
Front Sway Bar
[z5m,z5n,z5p]. Bushing. With Tubular Bar.
Stabilizer Bar Clamp. M8x1.25x45. Alternator Bracket to Right Side Engine Mount. Upper. Attaching.
Torsion Bar Rear Anchor Adjust Bolt. Rear Anchor Adjusting Screw. Rear Anchor Adjusting Bolt.
M10x1.5. Stabilizer Bar Link to Stabilizer. Swar Bar Link to Sway Bar.
Upper. I D=11.43 to 11.81. Large Hole I.D. 11.43/11.81. Grommet.
Lower. I D=10.12 to 10.50. Small Hole. Grommet.
Hex Flange Lock Nut, Mounting
M10x1.50. M14x1.50. UCA to Axle. M14x1.50. Ground Strap. M14x1.50. Sway Bar Plate. M10x1.5. Auxillary Bumper. M14x1.50. Track Bar To Axle. M10x1.5. Bracket, Control Arm. M10x1.5. UCA to Axle Mounting. M14x1.50. Resonator Attaching. M10x1.5. 3 Bolt Flange G ...
Hex Head Screw And Washer, Mounting
M10x1.50x40.00. M10x1.5x40. Bumper Brackets to Hitch End Brackets. Front Stabilizer Bar to Frame. Skid Plate to Sill. Retainer to Frame.
Stabilizer Bar Grommet Retainer
Bushing. Without Nipple Holes.