Cylinder Block for 2011 Dodge Durango
Item 13 Pin Kit Also Contained in Short Block Engine Kit. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine.. Short Block Engine Includes: Cylinder Block, Crankshaft Bearing Caps, Bearing Cap Bolts, Core Plugs, Dowel Pin ...
Short Block Engine Kit
See important mopar note. IMPORTANT NOTE***When A Long Block Engine Is Replaced New Or Remanufactured The Fasteners For The Transmission Bracket To Transmission Case MUST Be Replaced For The Orginal Fasteners Are A One Time Use Only. Order Fastener Kit PN 68329056AA. See important note for contents.
Short Block Engine Kit
New Part For Core Return. Item 13 Also Contained in Short Block Engine Kit. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine.
Mounting, Transmission To Cylinder Block. Transmission To Engine. Transmisasion To Cylinder Block.
M24x1.50. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine.. Coolant Drain. Oil Control Valve. Item 13 Also Contained in Short Block Engine Kit. Main Oil Gallery. Coolant Passage.
Mounting, Main Bearing Crossbar To Cylinder Block. Pump Bracket To Engine. Tensioner Bracket To Cylinder Head. M8x1.25x40.00. Main Bearing Cap Cross Bar To Cylinder Block.
Pin
Timing Chain Guide. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine.. Item 13 Also Contained in Short Block Engine Kit. Panel Attaching Pins. Timing Chain Drive.
Item 13 Pin Kit Also Contained in Short Block Engine Kit. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine.. Included With Short Block Engine. MUST Be Installed On Cylinder Block Before Engine Is Installed.
Piston Oil Cooler Jet To Cylinder Block. M5x.08x16.00. Door Handle to Door M5x16.
Hex Flange Head Bolt, Mounting, Inner
Inner Main Bearing Cap To Cylinder Block. Inboard Main Bearing Cap To Cylinder Block. M11x1.50x94.00.
Hex Flange Head Bolt, Mounting, Outer
M8x1.25x97.00. Main Bearing Cap To Cylinder block.
Hex Head Bolt And Washer, Mounting
SOLD INDIVIDUALLY Clutch Slave Cylinder Bracket. Camshaft Sensor to Timing Cover. M6X1.00X20.00. Engine Block Heater Cord. Bolt and washer hex head m6x1.00x20.00. [M6X1.00X20.00]. Oil Cooler Tube To Oil Pan. M6X1.00X20.00. Starter Motors To Transmission. M ...