For Dodge Challenger SRT® Redeye / Super Stock (2019-2023)

For Dodge Challenger SRT® Demon (2018)

For Dodge Charger SRT® Redeye (2021-2023)

Increase your engine performance to 885HP at the touch of a button when used in conjunction with the Redeye Pre-Stage Kit. Includes Hellephant pulley (80.5 mm/3.17-inch dia) for 2 lb. increase of boost over stock and high-performance factory-tuned calibration. 885HP is achieved by enabling high octane functionality via Redeye Pre-Stage Kit. Note: While high octane mode is not engaged, expected performance is 837HP.

*Requires purchase of Redeye Pre-Stage kit (P/N: 77072579AD Challenger 2019-2023 or P/N: 77072605AA Charger 2021-2023)

Includes high performance calibration key code which unlocks factory-tuned Stage 2 calibration. 885 HP is achieved by enabling high octane functionality via Redeye Pre-Stage Kit.

Turn-key HP upgrade for Hellcat Redeye

*Note: Calibrations are for US vehicles only

• Factory-tuned calibration for increased engine performance to 885 HP / 787 LBFT per SAE J1349 correction factor

• 3.17-inch dia. Hellephant Pulley

• DC keychain with calibration key code which unlocks high performance Stage 2 calibration

• Works in conjunction with high octane functionality

Security Gateway Module Update REQUIRED – Redeye Vehicles Only

In order for all features of the Direct Connection Tuner to function properly, please make sure your Security Gateway Module is flashed with calibration 68593431AB.

It is necessary to complete the Security Gateway module update BEFORE connecting to the Direct Connection Tuner. Failure to do so will result in reduced functionality. 

Please visit your Dodge Power Broker dealer to perform the proper flash procedure.

50-State Street Legal: 2019-2023 Dodge Challenger SRT® Redeye / Super Stock and 2021-2023 Charger SRT® Redeye (E.O. D-265-71), 2018 Dodge Challenger SRT® Demon (E.O. D-265-72)

***If you are a 2018 Challenger Demon owner and your kit did NOT come with D-265-72 EO Labels, you MUST contact the DC Tech Hotline to have a D-265-72 EO label sent to you to meet CARB Installation Requirements.

Either D-265-71 & D-265-72 EO Labels are OK to use on Challenger Redeye and Super Stock vehicles.*

For Dodge Challenger SRT® Redeye / Super Stock (2019-2023)

For Dodge Challenger SRT® Demon (2018)

For Dodge Charger SRT® Redeye (2021-2023)

Increase your engine performance to 885HP at the touch of a button when used in conjunction with the Redeye Pre-Stage Kit. Includes Hellephant pulley (80.5 mm/3.17-inch dia) for 2 lb. increase of boost over stock and high-performance factory-tuned calibration. 885HP is achieved by enabling high octane functionality via Redeye Pre-Stage Kit. Note: While high octane mode is not engaged, expected performance is 837HP.

*Requires purchase of Redeye Pre-Stage kit (P/N: 77072579AD Challenger 2019-2023 or P/N: 77072605AA Charger 2021-2023)

Includes high performance calibration key code which unlocks factory-tuned Stage 2 calibration. 885 HP is achieved by enabling high octane functionality via Redeye Pre-Stage Kit.

Turn-key HP upgrade for Hellcat Redeye

*Note: Calibrations are for US vehicles only

• Factory-tuned calibration for increased engine performance to 885 HP / 787 LBFT per SAE J1349 correction factor

• 3.17-inch dia. Hellephant Pulley

• DC keychain with calibration key code which unlocks high performance Stage 2 calibration

• Works in conjunction with high octane functionality

Security Gateway Module Update REQUIRED – Redeye Vehicles Only

In order for all features of the Direct Connection Tuner to function properly, please make sure your Security Gateway Module is flashed with calibration 68593431AB.

It is necessary to complete the Security Gateway module update BEFORE connecting to the Direct Connection Tuner. Failure to do so will result in reduced functionality. 

Please visit your Dodge Power Broker dealer to perform the proper flash procedure.

50-State Street Legal: 2019-2023 Dodge Challenger SRT® Redeye / Super Stock and 2021-2023 Charger SRT® Redeye (E.O. D-265-71), 2018 Dodge Challenger SRT® Demon (E.O. D-265-72)

***If you are a 2018 Challenger Demon owner and your kit did NOT come with D-265-72 EO Labels, you MUST contact the DC Tech Hotline to have a D-265-72 EO label sent to you to meet CARB Installation Requirements.

Either D-265-71 & D-265-72 EO Labels are OK to use on Challenger Redeye and Super Stock vehicles.*